Die Stock

Threading Taps

• British Standard Parallel Pipe Taps High Speed
• British Standard Taper Pipe Taps High Speed
• Combined Tap and Drill Cobalt Fract.
• Combined Tap and Drill High Speed
• Hand Taps Fractional Carbon Steel
• Hand Taps Fractional High Speed
• Hand Taps Metric
• Hand Taps Pipe Thread, High Speed, NPS
• Hand Taps Pipe Thread, High Speed, NPT
• Left Hand NPS Pipe Taps High Speed
• Left Hand Pipe Taps High Speed
• Left Hand Special Thread Fract. Spiral
• Left Hand Special Thread Fractional
• NPTF HS Steel, Extension Pipe Taps
• NPTF HS Steel, Ext. Pipe Taps, Interrupted thread
• Pipe Size Combined Tap and Drill, HS
• Pipe Tap Sets
• Pulley Taps, High Speed 6 inch
• Pulley Taps, High Speed 6-inch, Metric
• Special Thread Fractional H.S.
• Spiral Point Special Thread fractional H.S.
• Spiral Point Taper NPS High Speed
• Spiral Point Taper NPT High Speed

Threading Dies

• Hex Die Fractional Carbon Steel
• Hex Die Special Thread Metric Carbon Steel
• Hex Left Hand NPT Pipe Dies Carbon Steel
• Hex NPS Pipe Dies Carbon Steel
• Hex NPT Pipe Dies Carbon Steel
• Hex NPT Pipe Dies Carbon Steel USA
• Hex NPT Pipe Dies High Speed
• NPS Pipe Split Die HSS
• NPS Pipe Split Dies High Speed Steel
• Round Adjustable Die Left Hand Carbon Fract.
• Round Adjustable Die Left Hand H.S. Fract.
• Round Adjustable Die Left Hand H.S. Metric
• Round Adjustable Fractional Carbon Steel
• Round Adjustable Special Thread H.S. Fractional
• Round Adjustable Special Thread LH H.S. Fract.
• Round Adjustable Split Dies Fractional HS
• Round Adjustable Split Dies Metric
• Round Adjustable Split Dies Metric Carbon Steel
• Hex Die Fractional Left Hand Thread Carbon Steel
• Hex Die Metric Carbon Steel
• Hex Die Metric High Speed Steel
• Hex Die Special Thread Fractional Carbon Steel

End Mills

• Cobalt Center Cut Multi Flute Extra Long Length
• Solid Carbide End Mills 2-Flute
• Solid Carbide End Mills 3-Flute
• Solid Carbide End Mills 4-Flute
• Cobalt Center Cut Multi Flute Long Length
• Cobalt Center Cut Multi Flute Regular Length
• Cobalt Roughing
• Corner Rounding End Mills Cobalt
• Double-End, 2-Flute, High Speed
• Double-End, 4-Flute, High Speed
• Double-End, 4-Flute, High Speed, Center Cut
• H/D Combination Shank
• Metric Double End Mills Two Flute HS
• Metric Double End Mills, 4 flute HS
• Multi Flute High Speed
• Two Flute Ball End High Speed
• Two Flute High Speed
• Two Flute, Metric, Single End Mill HS
• Four Flute, Metric, Single End Mill HS

Metal Slitting Saws

• Jewelers Slotting Saws
• Plain Metal Slitting Saws HS
• Screw Slotting Saws
• Side Chip Staggered Teeth Slitting Saw
• Side Milling Cutters HS
• Staggered Teeth Side Milling Cutter HS

Tool Bits

• Carbide Tipped Tool Bits
  • CTL-Cut-Off
  • CTR-Cut-Off
  • EL-Left hand Offset Threading
  • ER-Right hand Offset Threading
  • GL Offset Side-Cutting
  • GR Offset Side-Cutting
  • Left Hand
  • Left Hand BL - 15 Degree Lead Angle
  • Pointed Nose D
  • Right Hand
  • Square Nose C
  • Threading Tool Bit
  • TRC-Round Shank Boring
  • TRE-Round Shank Boring
  • TSA-Square Shank Boring
  • TSC-Square Shank Boring
  • TSE-Square Shank Boring
• P type cut-off blades
  • P type Blades
• Right Hand BR - 15 Degree Lead Angle
• High Speed Square Tool Bit
• High Speed Round Tool Bit
• High Speed Rectangular Tool Bit
• Cobalt Square Tool Bit
• Cobalt Rectangular Tool Bit
• Cobalt Round Tool Bit

Annular Cutters

• Carbided Tipped 1" Depth of cut Annular Cutters
• Carbided Tipped 2" Depth of cut Annular Cutters
• Cobalt 1 inch Depth of Cut Annular Cutter
• Cobalt 2 inch Depth of Cut Annular Cutter
• H.S. 1 inch Depth of Cut Annular Cutter
• H.S. 2 inch Depth of Cut Annular Cutter
• HS 3 inch Depth of Cut Annular Cutter

Reamers

• Adjustable Hand Reamers, High Speed
• Chucking Reamer Cobalt Spiral Flute Fractional
• Chucking Reamer Cobalt Spiral Flute Fractional USA
• Chucking Reamer Cobalt Straight Flute Fractional
• Chucking Reamer Cobalt Straight Flute Letter
• Hand Expansion Reamers High Speed
• Hand Expansion Straight Flute Reamer
• Left Hand Expansion Reamers High Speed
• Left Hand Expansion Spiral Flute Reamer
• Metric Hand Expansion Reamer High Speed
• Metric Hand Expansion Straight Flute Reamer
• Taper Shank Chucking Reamer HS Spiral
• Taper Shank Chucking Reamer HS Straight
• Taper Shank Metric Chucking Reamer HS Straight
• TaperShank Chucking Reamer Carbide Tipped Straight
• Chucking Left Hand Straight Flute HS USA
• Chucking Reamer Straight Shank Straight Flute HS
• Chucking Right Hand Spiral Shank Straight Flute HS
• Chucking Reamer Strt. Shank Strt. Flute Cobalt
• Chucking Reamer Spiral Flute Wire Gauge
• Chucking Reamer Straight Wire Gauge
• Chucking Reamers Fractional Spiral
• Chucking Reamers Fractional Straight
• Chucking Reamers Letter Size Spiral
• Chucking Reamers Letter Size Straight
• Chucking Reamers Special Decimal HS
• Chucking Reamers Spiral Flute Made in USA
• Chucking Reamers Straight Flute Made in USA
• Chucking Left Reamers Hand Straight Flute HS USA
• Chucking Right Hand Spiral Flute Cobalt USA
• Hand Reamers Fractional Spiral HS
• Hand Reamers, Fractional, High Speed Steel,
  • Fractional, Spiral Flute
  • Fractional, Straight Flute
• High Speed Aligning Reamers Hex Shank
• High Speed Aligning Reamers Straight Shank

Inserts

Thread Repair Kits

• BIG-SERT Solid Insert Thread Repair Kits Inch
• Big-Sert Solid Insert Thread Repair Kits Metric
• Inch Series-Coarse Thread Repair
• Inch Series-Fine Thread Repair Kits
• Master Thread Repair Kits
• Metric Series-Coarse Thread Repair Kits
• Metric Series-Fine Thread Repair Kits
• Pipe Thread Series - Thread Repair Kits
• Spark Plug Series Solid Thread Repair Kit
• Time-Sert Inch Solid Insert Repair Kits
• Time-Sert Metric Solid Insert Repair Kits
• Time-Sert Solid Insert Thread Repair Kits

Countersinks

• Cobalt 82 Degree Countersink 3 Flute
• High Speed 100 Degree Countersink 3 Flute
• High Speed 120 Degree Countersink 3 Flute
• High Speed 60 Degree Countersink 3 Flute
• High Speed 60 Degree Countersink 4-Flute
• High Speed 82 Degree Countersink 3 Flute
• High Speed 82 Degree Countersink 4-Flute
• High Speed 90 Degree Countersink 3 Flute
• High Speed 90 Degree Countersink 4-Flute
• Sets
  • Cobalt 82 Degrees
  • High Speed 60 Degrees
  • High Speed 82 Degrees
  • High Speed 90 Degrees

Carbide Drills

• Jobbers Length Metric
• Jobbers Length Fractional
• Jobbers Length Letter Size
• Jobbers Length Wire Gauge Size
• Screw Machine Length Fractional
• Screw Machine Length Letter Size
• Screw Machine Length Straight Flute Fractional
• Screw Machine Length Straight Flute Letter Size
• Screw Machine Length Straight Flute Wire Gauge
• Screw Machine Length Straight Flute Metric Sizes
• Screw Machine Length Wire Gauge Size
• Spade Drills Screw Machine Length
• Carbide Tipped Drill Bits
  • Carbide Tipped Jobber Length Fractional
  • Carbide Tipped Jobber Length Letter
  • Carbide Tipped Jobber Length Wire Gauge
  • Carbide Tipped Taper Length Drill Bits
  • Carbide Tipped Taper Length Drill Metric

Wire Wheels and brushes

• Bench Wheel Wire Brushes
• Knotted Wire Wheels
• Cup Wire Brushes

Counterbores

• Metric Counterbores
• Numerical-Fractional Counterbore

Woodruff Key Seat Cutters H.S.

• Woodruff Key Seat Cutters Straight Teeth
• Woodruff Key Seat Cutters Staggered Teeth
• Woodruff Key Seat Cutters Straight Teeth

Custom Cutting Tools

Magnetic Drills

Cobalt Drill Bits

• Cobalt Fractional
  • Cobalt Fractional Silver and Deming
  • Cobalt Fractional Taper Length
  • Cobalt Jobbers Length
• Cobalt Fractional Drill Bits
  • Cobalt Fractional Taper Length
  • Cobalt Jobbers Length
  • Cobalt Fractional Silver and Deming
• Cobalt Fractional Silver and Deming Value Line
• Cobalt Taper Length Letter Size
• Cobalt Fractional Silver and Deming
• Cobalt Taper Length Wire Gauge
• Cobalt Extra Length Drill 8 inch
• Cobalt Extra Length Drill 12 inch

High Speed Drill Bits

• Taper Shank Drill Fractional
• Taper Shank Drill Oversize Shank
• Taper Shank Metric
• Taper Shank Stub Length Metric
• Aircraft Extension, High Speed, Fractional
• Letter Size Left-Hand Jobbers Length Drill H.S.
• Split Sleeve Morse Taper
• Taper Drill Small Shank
• Taper Length Wire Gauge High Speed
• Taper Length Drills High Speed
• Taper Length Drills Metric HS
• Taper Length Drills Tanged H
  • D HS
• Taper Length Drills Tanged H/D HS
• Taper Length Drills Tanged HS
• Taper Shank Drill Fractional
• Taper Shank Drill Oversize Shank
• Taper Shank Letter Size
• Taper Shank Metric
• Taper Shank Stub Length Metric
• Taper Shank Wire Gauge Size
• Fractional Left Hand Jobber Length Drill H.S.
• Metric Left Hand Jobber Length Drill H.S.
• Wire Size Left-Hand Jobbers Length Drill H.S.
• Screw Machine Length Drills
  • Fractional High Speed
  • Letter High Speed
  • Wire Gauge High Speed
• High Speed Fractional
  • High Speed Taper Length
  • High Speed Taper Length
• High Speed Taper Length, Fractional
• Extra Length Drill Bits
  • Extra Length High Speed - Best Value
  • Extra length High Speed 48 inch
  • Extra length High Speed 8 inch
  • Extra Long Fractional - Best Value
  • Extra length High Speed 12 inch
  • Extra length High Speed 18 inch
  • High Speed Extra Length 24 inch
• High Speed Silver and Deming
• High Speed Silver and Deming Metric

Chucks

• Drilling Machine Production Duty Chuck
• Portable Drilling Machine Medium Duty
• Portable Machine Drill Chuck Imported
• Stationary Drilling Machine Medium Duty Chuck

Combined Drills & Countersinks

• Cobalt 60 Degrees
• High Speed 60 Deg. Metric
• High Speed 60 Degrees
• High Speed 82 Degrees
• High Speed 90 Degrees
• High Speed Long 60 Degree
• Left-Hand High Speed 60 Degrees
• Titanium Coated High Speed 60 Degrees

End Mill Sets

Corner Rounding End Mills HS

Drill Bit Sets

Carbide Burrs

• Ball Shape (SD)
  • Double Cut
  • Single Cut
• Cone Shape (SK) with 90 deg. Included Angle
  • Double Cut
  • Single Cut
• Carbide Burr Sets
• Cone Shape (SJ) with 60 deg. Included Angle
  • Double Cut
  • Single Cut
• Cone Shape (SK) with 90 deg. Included Angle
  • Double Cut
  • Single Cut
• Cone Shape (SM)
  • Double Cut
  • Single Cut
• Cylindrical Shape (SA)
  • Double Cut
  • Single Cut
• Cylindrical Shape with End Cut (SB)
  • Double Cut
  • Single Cut
• Cylindrical Shape with Radius End (SC)
  • Double Cut
  • Single Cut
• Extra Long Solid Carbide Burs 6" Overall
  • 14 Degree Included Angle
  • Ball Shape
  • Cylindrical Ball Nose
  • Cylindrical Shape
  • Flame Shape
  • Oval Shape
  • Pointed Tree Shape
  • Round Tree Shape
• Extra Long Solid Carbide Burs 6” Overall
  • 14 Degree Included Angle
  • Ball Shape
  • Cylindrical Ball Nose
  • Cylindrical Shape
  • Flame Shape
  • Oval Shape
  • Pointed Tree Shape
  • Round Tree Shape
• Flame Shape (SH)
  • Double Cut
  • Single Cut
• Inverted Cone Shape (SN)
  • Double Cut
  • Single Cut
• Oval Shape (SE)
  • Double Cut
  • Single Cut
• Solid Carbide Burs for Aluminum Single Cut
  • 14 Degree Included Angle
  • Ball Shape
  • Cylindrical
  • Cylindrical Ball Nose
  • Oval Shape
  • Round Tree Shape
• Taper Shape (SL) with Radius End & 14 Deg.
  • Double Cut
  • Single Cut
• Tree Shape with Pointed End (SG)
  • Double Cut
  • Single Cut
• Tree Shape with Radius End (SF)
  • Double Cut
  • Single Cut

Abrasives

• Bench Grinding Wheels
• Flap Wheels
• Silver Line Grinding Wheels
• Flap Discs
• Flap Wheels-Aluminum Oxide
• Grinding wheels - Depressed Center
• Shop Rolls for Metal

Metric Combined Tap and Drill High Speed