Created with Sketch. Created with Sketch.
Toggle menu
Order Inquiries & Expedited Shipping: 305-878-7549
  • LoginorSign Up
  • 0
SUNCUTTING.COM
Reset Search ×
Reset Search ×
Reset Search ×
Reset Search ×

    Main Menu

  • Contact Us
  • Blog
  • Shipping & Returns
  • Privacy Policy

    • Shop By Category

  • Hand Taps
    • British Standard Parallel Pipe Taps High Speed
    • British Standard Taper Pipe Taps High Speed
    • Combined Tap and Drill Cobalt Fract.
    • Combined Tap and Drill High Speed
    • Hand Taps Fractional Carbon Steel
    • Hand Taps Fractional High Speed
    • Hand Taps Metric
    • Hand Taps Pipe Thread, High Speed, NPS
    • Hand Taps Pipe Thread, High Speed, NPT
    • Left Hand NPS Pipe Taps High Speed
    • Left Hand Pipe Taps High Speed
    • Left Hand Special Thread Fract. Spiral
    • Left Hand Special Thread Fractional
    • NPTF HS Steel, Extension Pipe Taps
    • NPTF HS Steel, Ext. Pipe Taps, Interrupted thread
    • Pipe Size Combined Tap and Drill, HS
    • Pipe Tap Sets
    • Pulley Taps, High Speed 6 inch
    • Pulley Taps, High Speed 6-inch, Metric
    • Special Thread Fractional H.S.
    • Spiral Point Special Thread fractional H.S.
    • Spiral Point Taper NPS High Speed
    • Spiral Point Taper NPT High Speed
  • Threading Dies
    • Hex Die Fractional Carbon Steel
    • Hex Die Special Thread Metric Carbon Steel
    • Hex Left Hand NPT Pipe Dies Carbon Steel
    • Hex NPS Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel USA
    • Hex NPT Pipe Dies High Speed
    • Round Adjustable Die Left Hand Carbon Fract.
    • Round Adjustable Die Left Hand H.S. Fract.
    • Round Adjustable Die Left Hand H.S. Metric
    • Round Adjustable Fractional Carbon Steel
    • Round Adjustable Special Thread H.S. Fractional
    • Round Adjustable Special Thread LH H.S. Fract.
    • Round Adjustable Split Dies Fractional HS
    • Round Adjustable Split Dies Metric Carbon Steel
    • Hex Die Fractional Left Hand Thread Carbon Steel
    • Hex Die Metric Carbon Steel
    • Hex Die Metric High Speed Steel
    • Hex Die Special Thread Fractional Carbon Steel
  • End Mills
    • Cobalt Center Cut Multi Flute Extra Long Length
    • Solid Carbide End Mills 2-Flute
    • Solid Carbide End Mills 3-Flute
    • Solid Carbide End Mills 4-Flute
    • Cobalt Center Cut Multi Flute Long Length
    • Cobalt Center Cut Multi Flute Regular Length
    • Cobalt Roughing
    • Corner Rounding End Mills Cobalt
    • Double-End, 2-Flute, High Speed
    • Double-End, 4-Flute, High Speed
    • Double-End, 4-Flute, High Speed, Center Cut
    • H/D Combination Shank
    • Metric Double End Mills Two Flute HS
    • Metric Double End Mills, 4 flute HS
    • Multi Flute High Speed
    • Two Flute Ball End High Speed
    • Two Flute High Speed
    • Two Flute, Metric, Single End Mill HS
    • Four Flute, Metric, Single End Mill HS
  • Metal Slitting Saws
    • Jewelers Slotting Saws
    • Plain Metal Slitting Saws HS
    • Screw Slotting Saws
    • Side Chip Staggered Teeth Slitting Saw
    • Side Milling Cutters HS
    • Staggered Teeth Side Milling Cutter HS
  • Tool Bits
    • Carbide Tipped Tool Bits
      • CTL-Cut-Off
      • CTR-Cut-Off
      • EL-Left hand Offset Threading
      • ER-Right hand Offset Threading
      • GL Offset Side-Cutting
      • GR Offset Side-Cutting
      • Left Hand
      • Left Hand BL - 15 Degree Lead Angle
      • Pointed Nose D
      • Right Hand
      • Square Nose C
      • Threading Tool Bit
      • TRC-Round Shank Boring
      • TRE-Round Shank Boring
      • TSA-Square Shank Boring
      • TSC-Square Shank Boring
      • TSE-Square Shank Boring
    • P type cut-off blades
      • P type Blades
    • Right Hand BR - 15 Degree Lead Angle
    • High Speed Square Tool Bit
    • High Speed Round Tool Bit
    • High Speed Rectangular Tool Bit
    • Cobalt Square Tool Bit
    • Cobalt Rectangular Tool Bit
    • Cobalt Round Tool Bit
  • Inserts
  • Countersinks
    • Cobalt 82 Degree Countersink 3 Flute
    • High Speed 100 Degree Countersink 3 Flute
    • High Speed 120 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 4-Flute
    • High Speed 82 Degree Countersink 3 Flute
    • High Speed 82 Degree Countersink 4-Flute
    • High Speed 90 Degree Countersink 3 Flute
    • High Speed 90 Degree Countersink 4-Flute
    • Sets
      • Cobalt 82 Degrees
      • High Speed 60 Degrees
      • High Speed 82 Degrees
      • High Speed 90 Degrees
  • Wire Wheels and brushes
    • Bench Wheel Wire Brushes
    • Knotted Wire Wheels
    • Cup Wire Brushes
  • Annular Cutters
    • Carbided Tipped 1" Depth of cut Annular Cutters
    • Carbided Tipped 2" Depth of cut Annular Cutters
    • Cobalt 1 inch Depth of Cut Annular Cutter
    • Cobalt 2 inch Depth of Cut Annular Cutter
    • H.S. 1 inch Depth of Cut Annular Cutter
    • H.S. 2 inch Depth of Cut Annular Cutter
    • HS 3 inch Depth of Cut Annular Cutter
  • Custom Cutting Tools
  • Thread Repair Kits
    • BIG-SERT Solid Insert Thread Repair Kits Inch
    • Big-Sert Solid Insert Thread Repair Kits Metric
    • Inch Series-Coarse Thread Repair
    • Inch Series-Fine Thread Repair Kits
    • Master Thread Repair Kits
    • Metric Series-Coarse Thread Repair Kits
    • Metric Series-Fine Thread Repair Kits
    • Pipe Thread Series - Thread Repair Kits
    • Spark Plug Series Solid Thread Repair Kit
    • Time-Sert Inch Solid Insert Repair Kits
    • Time-Sert Metric Solid Insert Repair Kits
    • Time-Sert Solid Insert Thread Repair Kits
  • Magnetic Drills
  • Cobalt Drill Bits
    • Cobalt Fractional
      • Cobalt Fractional Silver and Deming
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
    • Cobalt Fractional Drill Bits
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
      • Cobalt Fractional Silver and Deming
    • Cobalt Fractional Silver and Deming Value Line
    • Cobalt Taper Length Letter Size
    • Cobalt Fractional Silver and Deming
    • Cobalt Taper Length Wire Gauge
    • Cobalt Extra Length Drill 8 inch
    • Cobalt Extra Length Drill 12 inch
  • Chucks
    • Drilling Machine Production Duty Chuck
    • Portable Drilling Machine Medium Duty
    • Portable Machine Drill Chuck Imported
    • Stationary Drilling Machine Medium Duty Chuck
  • Combined Drills & Countersinks
    • Cobalt 60 Degrees
    • High Speed 60 Deg. Metric
    • High Speed 60 Degrees
    • High Speed 82 Degrees
    • High Speed 90 Degrees
    • High Speed Long 60 Degree
    • Left-Hand High Speed 60 Degrees
    • Titanium Coated High Speed 60 Degrees
  • End Mill Sets
  • Drill Bit Sets
  • Carbide Burrs
    • Ball Shape (SD)
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Carbide Burr Sets
    • Cone Shape (SJ) with 60 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SM)
      • Double Cut
      • Single Cut
    • Cylindrical Shape (SA)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with End Cut (SB)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with Radius End (SC)
      • Double Cut
      • Single Cut
    • Extra Long Solid Carbide Burs 6" Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Extra Long Solid Carbide Burs 6” Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Flame Shape (SH)
      • Double Cut
      • Single Cut
    • Inverted Cone Shape (SN)
      • Double Cut
      • Single Cut
    • Oval Shape (SE)
      • Double Cut
      • Single Cut
    • Solid Carbide Burs for Aluminum Single Cut
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical
      • Cylindrical Ball Nose
      • Oval Shape
      • Round Tree Shape
    • Taper Shape (SL) with Radius End & 14 Deg.
      • Double Cut
      • Single Cut
    • Tree Shape with Pointed End (SG)
      • Double Cut
      • Single Cut
    • Tree Shape with Radius End (SF)
      • Double Cut
      • Single Cut
  • Abrasives
    • Bench Grinding Wheels
    • Flap Wheels
    • Silver Line Grinding Wheels
    • Flap Discs
    • Flap Wheels-Aluminum Oxide
    • Grinding wheels - Depressed Center
    • Shop Rolls for Metal
  • Metric Combined Tap and Drill High Speed
  • Woodruff Key Seat Cutters H.S.
    • Woodruff Key Seat Cutters Straight Teeth
    • Woodruff Key Seat Cutters Staggered Teeth
    • Woodruff Key Seat Cutters Straight Teeth
  • Counterbores
    • Metric Counterbores
    • Numerical-Fractional Counterbore
  • Corner Rounding End Mills HS
  • Carbide Drills
    • Jobbers Length Metric
    • Jobbers Length Fractional
    • Jobbers Length Letter Size
    • Jobbers Length Wire Gauge Size
    • Screw Machine Length Fractional
    • Screw Machine Length Letter Size
    • Screw Machine Length Straight Flute Fractional
    • Screw Machine Length Straight Flute Letter Size
    • Screw Machine Length Straight Flute Wire Gauge
    • Screw Machine Length Straight Flute Metric Sizes
    • Screw Machine Length Wire Gauge Size
    • Spade Drills Screw Machine Length
    • Carbide Tipped Drill Bits
      • Carbide Tipped Jobber Length Fractional
      • Carbide Tipped Jobber Length Letter
      • Carbide Tipped Jobber Length Wire Gauge
      • Carbide Tipped Taper Length Drill Bits
      • Carbide Tipped Taper Length Drill Metric
  • Reamers
    • Adjustable Hand Reamers, High Speed
    • Chucking Reamer Cobalt Spiral Flute Fractional
    • Chucking Reamer Cobalt Spiral Flute Fractional USA
    • Chucking Reamer Cobalt Straight Flute Fractional
    • Chucking Reamer Cobalt Straight Flute Letter
    • Hand Expansion Reamers High Speed
    • Hand Expansion Straight Flute Reamer
    • Left Hand Expansion Reamers High Speed
    • Left Hand Expansion Spiral Flute Reamer
    • Metric Hand Expansion Reamer High Speed
    • Metric Hand Expansion Straight Flute Reamer
    • Taper Shank Chucking Reamer HS Spiral
    • Taper Shank Chucking Reamer HS Straight
    • Taper Shank Metric Chucking Reamer HS Straight
    • TaperShank Chucking Reamer Carbide Tipped Straight
    • Chucking Left Hand Straight Flute HS USA
    • Chucking Reamer Straight Shank Straight Flute HS
    • Chucking Right Hand Spiral Shank Straight Flute HS
    • Chucking Reamer Strt. Shank Strt. Flute Cobalt
    • Chucking Reamer Spiral Flute Wire Gauge
    • Chucking Reamer Straight Wire Gauge
    • Chucking Reamers Fractional Spiral
    • Chucking Reamers Fractional Straight
    • Chucking Reamers Letter Size Spiral
    • Chucking Reamers Letter Size Straight
    • Chucking Reamers Special Decimal HS
    • Chucking Reamers Spiral Flute Made in USA
    • Chucking Reamers Straight Flute Made in USA
    • Chucking Left Reamers Hand Straight Flute HS USA
    • Chucking Right Hand Spiral Flute Cobalt USA
    • Hand Reamers Fractional Spiral HS
    • Hand Reamers, Fractional, High Speed Steel,
      • Fractional, Spiral Flute
      • Fractional, Straight Flute
    • High Speed Aligning Reamers Hex Shank
    • High Speed Aligning Reamers Straight Shank
  • High Speed Drill Bits
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Aircraft Extension, High Speed, Fractional
    • Letter Size Left-Hand Jobbers Length Drill H.S.
    • Split Sleeve Morse Taper
    • Taper Drill Small Shank
    • Taper Length Wire Gauge High Speed
    • Taper Length Drills High Speed
    • Taper Length Drills Metric HS
    • Taper Length Drills Tanged H
      • D HS
    • Taper Length Drills Tanged H/D HS
    • Taper Length Drills Tanged HS
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Letter Size
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Taper Shank Wire Gauge Size
    • Fractional Left Hand Jobber Length Drill H.S.
    • Metric Left Hand Jobber Length Drill H.S.
    • Wire Size Left-Hand Jobbers Length Drill H.S.
    • Screw Machine Length Drills
      • Fractional High Speed
      • Letter High Speed
      • Wire Gauge High Speed
    • High Speed Fractional
      • High Speed Taper Length
      • High Speed Taper Length
    • High Speed Taper Length, Fractional
    • Extra Length Drill Bits
      • Extra Length High Speed - Best Value
      • Extra length High Speed 48 inch
      • Extra length High Speed 8 inch
      • Extra Long Fractional - Best Value
      • Extra length High Speed 12 inch
      • Extra length High Speed 18 inch
      • High Speed Extra Length 24 inch
    • High Speed Silver and Deming
    • High Speed Silver and Deming Metric

    • Shop By Brand

  • Suncutting
  • Lavallee & IDE
  • Pearl Abrasives
  • Perma-coil
  • Time-Sert
  • Cushman
  • Big-Sert
  • Euroboor
  • View all Brands
  • Gift Certificates
  • Login or Sign Up
Reset Search ×

    Main Menu

  • Contact Us
  • Blog
  • Shipping & Returns
  • Privacy Policy

    • Shop By Category

  • Hand Taps
    • British Standard Parallel Pipe Taps High Speed
    • British Standard Taper Pipe Taps High Speed
    • Combined Tap and Drill Cobalt Fract.
    • Combined Tap and Drill High Speed
    • Hand Taps Fractional Carbon Steel
    • Hand Taps Fractional High Speed
    • Hand Taps Metric
    • Hand Taps Pipe Thread, High Speed, NPS
    • Hand Taps Pipe Thread, High Speed, NPT
    • Left Hand NPS Pipe Taps High Speed
    • Left Hand Pipe Taps High Speed
    • Left Hand Special Thread Fract. Spiral
    • Left Hand Special Thread Fractional
    • NPTF HS Steel, Extension Pipe Taps
    • NPTF HS Steel, Ext. Pipe Taps, Interrupted thread
    • Pipe Size Combined Tap and Drill, HS
    • Pipe Tap Sets
    • Pulley Taps, High Speed 6 inch
    • Pulley Taps, High Speed 6-inch, Metric
    • Special Thread Fractional H.S.
    • Spiral Point Special Thread fractional H.S.
    • Spiral Point Taper NPS High Speed
    • Spiral Point Taper NPT High Speed
  • Threading Dies
    • Hex Die Fractional Carbon Steel
    • Hex Die Special Thread Metric Carbon Steel
    • Hex Left Hand NPT Pipe Dies Carbon Steel
    • Hex NPS Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel USA
    • Hex NPT Pipe Dies High Speed
    • Round Adjustable Die Left Hand Carbon Fract.
    • Round Adjustable Die Left Hand H.S. Fract.
    • Round Adjustable Die Left Hand H.S. Metric
    • Round Adjustable Fractional Carbon Steel
    • Round Adjustable Special Thread H.S. Fractional
    • Round Adjustable Special Thread LH H.S. Fract.
    • Round Adjustable Split Dies Fractional HS
    • Round Adjustable Split Dies Metric Carbon Steel
    • Hex Die Fractional Left Hand Thread Carbon Steel
    • Hex Die Metric Carbon Steel
    • Hex Die Metric High Speed Steel
    • Hex Die Special Thread Fractional Carbon Steel
  • End Mills
    • Cobalt Center Cut Multi Flute Extra Long Length
    • Solid Carbide End Mills 2-Flute
    • Solid Carbide End Mills 3-Flute
    • Solid Carbide End Mills 4-Flute
    • Cobalt Center Cut Multi Flute Long Length
    • Cobalt Center Cut Multi Flute Regular Length
    • Cobalt Roughing
    • Corner Rounding End Mills Cobalt
    • Double-End, 2-Flute, High Speed
    • Double-End, 4-Flute, High Speed
    • Double-End, 4-Flute, High Speed, Center Cut
    • H/D Combination Shank
    • Metric Double End Mills Two Flute HS
    • Metric Double End Mills, 4 flute HS
    • Multi Flute High Speed
    • Two Flute Ball End High Speed
    • Two Flute High Speed
    • Two Flute, Metric, Single End Mill HS
    • Four Flute, Metric, Single End Mill HS
  • Metal Slitting Saws
    • Jewelers Slotting Saws
    • Plain Metal Slitting Saws HS
    • Screw Slotting Saws
    • Side Chip Staggered Teeth Slitting Saw
    • Side Milling Cutters HS
    • Staggered Teeth Side Milling Cutter HS
  • Tool Bits
    • Carbide Tipped Tool Bits
      • CTL-Cut-Off
      • CTR-Cut-Off
      • EL-Left hand Offset Threading
      • ER-Right hand Offset Threading
      • GL Offset Side-Cutting
      • GR Offset Side-Cutting
      • Left Hand
      • Left Hand BL - 15 Degree Lead Angle
      • Pointed Nose D
      • Right Hand
      • Square Nose C
      • Threading Tool Bit
      • TRC-Round Shank Boring
      • TRE-Round Shank Boring
      • TSA-Square Shank Boring
      • TSC-Square Shank Boring
      • TSE-Square Shank Boring
    • P type cut-off blades
      • P type Blades
    • Right Hand BR - 15 Degree Lead Angle
    • High Speed Square Tool Bit
    • High Speed Round Tool Bit
    • High Speed Rectangular Tool Bit
    • Cobalt Square Tool Bit
    • Cobalt Rectangular Tool Bit
    • Cobalt Round Tool Bit
  • Inserts
  • Countersinks
    • Cobalt 82 Degree Countersink 3 Flute
    • High Speed 100 Degree Countersink 3 Flute
    • High Speed 120 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 4-Flute
    • High Speed 82 Degree Countersink 3 Flute
    • High Speed 82 Degree Countersink 4-Flute
    • High Speed 90 Degree Countersink 3 Flute
    • High Speed 90 Degree Countersink 4-Flute
    • Sets
      • Cobalt 82 Degrees
      • High Speed 60 Degrees
      • High Speed 82 Degrees
      • High Speed 90 Degrees
  • Wire Wheels and brushes
    • Bench Wheel Wire Brushes
    • Knotted Wire Wheels
    • Cup Wire Brushes
  • Annular Cutters
    • Carbided Tipped 1" Depth of cut Annular Cutters
    • Carbided Tipped 2" Depth of cut Annular Cutters
    • Cobalt 1 inch Depth of Cut Annular Cutter
    • Cobalt 2 inch Depth of Cut Annular Cutter
    • H.S. 1 inch Depth of Cut Annular Cutter
    • H.S. 2 inch Depth of Cut Annular Cutter
    • HS 3 inch Depth of Cut Annular Cutter
  • Custom Cutting Tools
  • Thread Repair Kits
    • BIG-SERT Solid Insert Thread Repair Kits Inch
    • Big-Sert Solid Insert Thread Repair Kits Metric
    • Inch Series-Coarse Thread Repair
    • Inch Series-Fine Thread Repair Kits
    • Master Thread Repair Kits
    • Metric Series-Coarse Thread Repair Kits
    • Metric Series-Fine Thread Repair Kits
    • Pipe Thread Series - Thread Repair Kits
    • Spark Plug Series Solid Thread Repair Kit
    • Time-Sert Inch Solid Insert Repair Kits
    • Time-Sert Metric Solid Insert Repair Kits
    • Time-Sert Solid Insert Thread Repair Kits
  • Magnetic Drills
  • Cobalt Drill Bits
    • Cobalt Fractional
      • Cobalt Fractional Silver and Deming
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
    • Cobalt Fractional Drill Bits
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
      • Cobalt Fractional Silver and Deming
    • Cobalt Fractional Silver and Deming Value Line
    • Cobalt Taper Length Letter Size
    • Cobalt Fractional Silver and Deming
    • Cobalt Taper Length Wire Gauge
    • Cobalt Extra Length Drill 8 inch
    • Cobalt Extra Length Drill 12 inch
  • Chucks
    • Drilling Machine Production Duty Chuck
    • Portable Drilling Machine Medium Duty
    • Portable Machine Drill Chuck Imported
    • Stationary Drilling Machine Medium Duty Chuck
  • Combined Drills & Countersinks
    • Cobalt 60 Degrees
    • High Speed 60 Deg. Metric
    • High Speed 60 Degrees
    • High Speed 82 Degrees
    • High Speed 90 Degrees
    • High Speed Long 60 Degree
    • Left-Hand High Speed 60 Degrees
    • Titanium Coated High Speed 60 Degrees
  • End Mill Sets
  • Drill Bit Sets
  • Carbide Burrs
    • Ball Shape (SD)
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Carbide Burr Sets
    • Cone Shape (SJ) with 60 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SM)
      • Double Cut
      • Single Cut
    • Cylindrical Shape (SA)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with End Cut (SB)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with Radius End (SC)
      • Double Cut
      • Single Cut
    • Extra Long Solid Carbide Burs 6" Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Extra Long Solid Carbide Burs 6” Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Flame Shape (SH)
      • Double Cut
      • Single Cut
    • Inverted Cone Shape (SN)
      • Double Cut
      • Single Cut
    • Oval Shape (SE)
      • Double Cut
      • Single Cut
    • Solid Carbide Burs for Aluminum Single Cut
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical
      • Cylindrical Ball Nose
      • Oval Shape
      • Round Tree Shape
    • Taper Shape (SL) with Radius End & 14 Deg.
      • Double Cut
      • Single Cut
    • Tree Shape with Pointed End (SG)
      • Double Cut
      • Single Cut
    • Tree Shape with Radius End (SF)
      • Double Cut
      • Single Cut
  • Abrasives
    • Bench Grinding Wheels
    • Flap Wheels
    • Silver Line Grinding Wheels
    • Flap Discs
    • Flap Wheels-Aluminum Oxide
    • Grinding wheels - Depressed Center
    • Shop Rolls for Metal
  • Metric Combined Tap and Drill High Speed
  • Woodruff Key Seat Cutters H.S.
    • Woodruff Key Seat Cutters Straight Teeth
    • Woodruff Key Seat Cutters Staggered Teeth
    • Woodruff Key Seat Cutters Straight Teeth
  • Counterbores
    • Metric Counterbores
    • Numerical-Fractional Counterbore
  • Corner Rounding End Mills HS
  • Carbide Drills
    • Jobbers Length Metric
    • Jobbers Length Fractional
    • Jobbers Length Letter Size
    • Jobbers Length Wire Gauge Size
    • Screw Machine Length Fractional
    • Screw Machine Length Letter Size
    • Screw Machine Length Straight Flute Fractional
    • Screw Machine Length Straight Flute Letter Size
    • Screw Machine Length Straight Flute Wire Gauge
    • Screw Machine Length Straight Flute Metric Sizes
    • Screw Machine Length Wire Gauge Size
    • Spade Drills Screw Machine Length
    • Carbide Tipped Drill Bits
      • Carbide Tipped Jobber Length Fractional
      • Carbide Tipped Jobber Length Letter
      • Carbide Tipped Jobber Length Wire Gauge
      • Carbide Tipped Taper Length Drill Bits
      • Carbide Tipped Taper Length Drill Metric
  • Reamers
    • Adjustable Hand Reamers, High Speed
    • Chucking Reamer Cobalt Spiral Flute Fractional
    • Chucking Reamer Cobalt Spiral Flute Fractional USA
    • Chucking Reamer Cobalt Straight Flute Fractional
    • Chucking Reamer Cobalt Straight Flute Letter
    • Hand Expansion Reamers High Speed
    • Hand Expansion Straight Flute Reamer
    • Left Hand Expansion Reamers High Speed
    • Left Hand Expansion Spiral Flute Reamer
    • Metric Hand Expansion Reamer High Speed
    • Metric Hand Expansion Straight Flute Reamer
    • Taper Shank Chucking Reamer HS Spiral
    • Taper Shank Chucking Reamer HS Straight
    • Taper Shank Metric Chucking Reamer HS Straight
    • TaperShank Chucking Reamer Carbide Tipped Straight
    • Chucking Left Hand Straight Flute HS USA
    • Chucking Reamer Straight Shank Straight Flute HS
    • Chucking Right Hand Spiral Shank Straight Flute HS
    • Chucking Reamer Strt. Shank Strt. Flute Cobalt
    • Chucking Reamer Spiral Flute Wire Gauge
    • Chucking Reamer Straight Wire Gauge
    • Chucking Reamers Fractional Spiral
    • Chucking Reamers Fractional Straight
    • Chucking Reamers Letter Size Spiral
    • Chucking Reamers Letter Size Straight
    • Chucking Reamers Special Decimal HS
    • Chucking Reamers Spiral Flute Made in USA
    • Chucking Reamers Straight Flute Made in USA
    • Chucking Left Reamers Hand Straight Flute HS USA
    • Chucking Right Hand Spiral Flute Cobalt USA
    • Hand Reamers Fractional Spiral HS
    • Hand Reamers, Fractional, High Speed Steel,
      • Fractional, Spiral Flute
      • Fractional, Straight Flute
    • High Speed Aligning Reamers Hex Shank
    • High Speed Aligning Reamers Straight Shank
  • High Speed Drill Bits
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Aircraft Extension, High Speed, Fractional
    • Letter Size Left-Hand Jobbers Length Drill H.S.
    • Split Sleeve Morse Taper
    • Taper Drill Small Shank
    • Taper Length Wire Gauge High Speed
    • Taper Length Drills High Speed
    • Taper Length Drills Metric HS
    • Taper Length Drills Tanged H
      • D HS
    • Taper Length Drills Tanged H/D HS
    • Taper Length Drills Tanged HS
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Letter Size
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Taper Shank Wire Gauge Size
    • Fractional Left Hand Jobber Length Drill H.S.
    • Metric Left Hand Jobber Length Drill H.S.
    • Wire Size Left-Hand Jobbers Length Drill H.S.
    • Screw Machine Length Drills
      • Fractional High Speed
      • Letter High Speed
      • Wire Gauge High Speed
    • High Speed Fractional
      • High Speed Taper Length
      • High Speed Taper Length
    • High Speed Taper Length, Fractional
    • Extra Length Drill Bits
      • Extra Length High Speed - Best Value
      • Extra length High Speed 48 inch
      • Extra length High Speed 8 inch
      • Extra Long Fractional - Best Value
      • Extra length High Speed 12 inch
      • Extra length High Speed 18 inch
      • High Speed Extra Length 24 inch
    • High Speed Silver and Deming
    • High Speed Silver and Deming Metric

    • Shop By Brand

  • Suncutting
  • Lavallee & IDE
  • Pearl Abrasives
  • Perma-coil
  • Time-Sert
  • Cushman
  • Big-Sert
  • Euroboor
  • View all Brands
  • Gift Certificates
  • Login or Sign Up

Shop by Category

  • Hand Taps
    • British Standard Parallel Pipe Taps High Speed
    • British Standard Taper Pipe Taps High Speed
    • Combined Tap and Drill Cobalt Fract.
    • Combined Tap and Drill High Speed
    • Hand Taps Fractional Carbon Steel
    • Hand Taps Fractional High Speed
    • Hand Taps Metric
    • Hand Taps Pipe Thread, High Speed, NPS
    • Hand Taps Pipe Thread, High Speed, NPT
    • Left Hand NPS Pipe Taps High Speed
    • Left Hand Pipe Taps High Speed
    • Left Hand Special Thread Fract. Spiral
    • Left Hand Special Thread Fractional
    • NPTF HS Steel, Extension Pipe Taps
    • NPTF HS Steel, Ext. Pipe Taps, Interrupted thread
    • Pipe Size Combined Tap and Drill, HS
    • Pipe Tap Sets
    • Pulley Taps, High Speed 6 inch
    • Pulley Taps, High Speed 6-inch, Metric
    • Special Thread Fractional H.S.
    • Spiral Point Special Thread fractional H.S.
    • Spiral Point Taper NPS High Speed
    • Spiral Point Taper NPT High Speed
  • Threading Dies
    • Hex Die Fractional Carbon Steel
    • Hex Die Special Thread Metric Carbon Steel
    • Hex Left Hand NPT Pipe Dies Carbon Steel
    • Hex NPS Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel
    • Hex NPT Pipe Dies Carbon Steel USA
    • Hex NPT Pipe Dies High Speed
    • Round Adjustable Die Left Hand Carbon Fract.
    • Round Adjustable Die Left Hand H.S. Fract.
    • Round Adjustable Die Left Hand H.S. Metric
    • Round Adjustable Fractional Carbon Steel
    • Round Adjustable Special Thread H.S. Fractional
    • Round Adjustable Special Thread LH H.S. Fract.
    • Round Adjustable Split Dies Fractional HS
    • Round Adjustable Split Dies Metric Carbon Steel
    • Hex Die Fractional Left Hand Thread Carbon Steel
    • Hex Die Metric Carbon Steel
    • Hex Die Metric High Speed Steel
    • Hex Die Special Thread Fractional Carbon Steel
  • End Mills
    • Cobalt Center Cut Multi Flute Extra Long Length
    • Solid Carbide End Mills 2-Flute
    • Solid Carbide End Mills 3-Flute
    • Solid Carbide End Mills 4-Flute
    • Cobalt Center Cut Multi Flute Long Length
    • Cobalt Center Cut Multi Flute Regular Length
    • Cobalt Roughing
    • Corner Rounding End Mills Cobalt
    • Double-End, 2-Flute, High Speed
    • Double-End, 4-Flute, High Speed
    • Double-End, 4-Flute, High Speed, Center Cut
    • H/D Combination Shank
    • Metric Double End Mills Two Flute HS
    • Metric Double End Mills, 4 flute HS
    • Multi Flute High Speed
    • Two Flute Ball End High Speed
    • Two Flute High Speed
    • Two Flute, Metric, Single End Mill HS
    • Four Flute, Metric, Single End Mill HS
  • Metal Slitting Saws
    • Jewelers Slotting Saws
    • Plain Metal Slitting Saws HS
    • Screw Slotting Saws
    • Side Chip Staggered Teeth Slitting Saw
    • Side Milling Cutters HS
    • Staggered Teeth Side Milling Cutter HS
  • Tool Bits
    • Carbide Tipped Tool Bits
      • CTL-Cut-Off
      • CTR-Cut-Off
      • EL-Left hand Offset Threading
      • ER-Right hand Offset Threading
      • GL Offset Side-Cutting
      • GR Offset Side-Cutting
      • Left Hand
      • Left Hand BL - 15 Degree Lead Angle
      • Pointed Nose D
      • Right Hand
      • Square Nose C
      • Threading Tool Bit
      • TRC-Round Shank Boring
      • TRE-Round Shank Boring
      • TSA-Square Shank Boring
      • TSC-Square Shank Boring
      • TSE-Square Shank Boring
    • P type cut-off blades
      • P type Blades
    • Right Hand BR - 15 Degree Lead Angle
    • High Speed Square Tool Bit
    • High Speed Round Tool Bit
    • High Speed Rectangular Tool Bit
    • Cobalt Square Tool Bit
    • Cobalt Rectangular Tool Bit
    • Cobalt Round Tool Bit
  • Inserts
  • Countersinks
    • Cobalt 82 Degree Countersink 3 Flute
    • High Speed 100 Degree Countersink 3 Flute
    • High Speed 120 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 3 Flute
    • High Speed 60 Degree Countersink 4-Flute
    • High Speed 82 Degree Countersink 3 Flute
    • High Speed 82 Degree Countersink 4-Flute
    • High Speed 90 Degree Countersink 3 Flute
    • High Speed 90 Degree Countersink 4-Flute
    • Sets
      • Cobalt 82 Degrees
      • High Speed 60 Degrees
      • High Speed 82 Degrees
      • High Speed 90 Degrees
  • Wire Wheels and brushes
    • Bench Wheel Wire Brushes
    • Knotted Wire Wheels
    • Cup Wire Brushes
  • Annular Cutters
    • Carbided Tipped 1" Depth of cut Annular Cutters
    • Carbided Tipped 2" Depth of cut Annular Cutters
    • Cobalt 1 inch Depth of Cut Annular Cutter
    • Cobalt 2 inch Depth of Cut Annular Cutter
    • H.S. 1 inch Depth of Cut Annular Cutter
    • H.S. 2 inch Depth of Cut Annular Cutter
    • HS 3 inch Depth of Cut Annular Cutter
  • Custom Cutting Tools
  • Thread Repair Kits
    • BIG-SERT Solid Insert Thread Repair Kits Inch
    • Big-Sert Solid Insert Thread Repair Kits Metric
    • Inch Series-Coarse Thread Repair
    • Inch Series-Fine Thread Repair Kits
    • Master Thread Repair Kits
    • Metric Series-Coarse Thread Repair Kits
    • Metric Series-Fine Thread Repair Kits
    • Pipe Thread Series - Thread Repair Kits
    • Spark Plug Series Solid Thread Repair Kit
    • Time-Sert Inch Solid Insert Repair Kits
    • Time-Sert Metric Solid Insert Repair Kits
    • Time-Sert Solid Insert Thread Repair Kits
  • Magnetic Drills
  • Cobalt Drill Bits
    • Cobalt Fractional
      • Cobalt Fractional Silver and Deming
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
    • Cobalt Fractional Drill Bits
      • Cobalt Fractional Taper Length
      • Cobalt Jobbers Length
      • Cobalt Fractional Silver and Deming
    • Cobalt Fractional Silver and Deming Value Line
    • Cobalt Taper Length Letter Size
    • Cobalt Fractional Silver and Deming
    • Cobalt Taper Length Wire Gauge
    • Cobalt Extra Length Drill 8 inch
    • Cobalt Extra Length Drill 12 inch
  • Chucks
    • Drilling Machine Production Duty Chuck
    • Portable Drilling Machine Medium Duty
    • Portable Machine Drill Chuck Imported
    • Stationary Drilling Machine Medium Duty Chuck
  • Combined Drills & Countersinks
    • Cobalt 60 Degrees
    • High Speed 60 Deg. Metric
    • High Speed 60 Degrees
    • High Speed 82 Degrees
    • High Speed 90 Degrees
    • High Speed Long 60 Degree
    • Left-Hand High Speed 60 Degrees
    • Titanium Coated High Speed 60 Degrees
  • End Mill Sets
  • Drill Bit Sets
  • Carbide Burrs
    • Ball Shape (SD)
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Carbide Burr Sets
    • Cone Shape (SJ) with 60 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SK) with 90 deg. Included Angle
      • Double Cut
      • Single Cut
    • Cone Shape (SM)
      • Double Cut
      • Single Cut
    • Cylindrical Shape (SA)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with End Cut (SB)
      • Double Cut
      • Single Cut
    • Cylindrical Shape with Radius End (SC)
      • Double Cut
      • Single Cut
    • Extra Long Solid Carbide Burs 6" Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Extra Long Solid Carbide Burs 6” Overall
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical Ball Nose
      • Cylindrical Shape
      • Flame Shape
      • Oval Shape
      • Pointed Tree Shape
      • Round Tree Shape
    • Flame Shape (SH)
      • Double Cut
      • Single Cut
    • Inverted Cone Shape (SN)
      • Double Cut
      • Single Cut
    • Oval Shape (SE)
      • Double Cut
      • Single Cut
    • Solid Carbide Burs for Aluminum Single Cut
      • 14 Degree Included Angle
      • Ball Shape
      • Cylindrical
      • Cylindrical Ball Nose
      • Oval Shape
      • Round Tree Shape
    • Taper Shape (SL) with Radius End & 14 Deg.
      • Double Cut
      • Single Cut
    • Tree Shape with Pointed End (SG)
      • Double Cut
      • Single Cut
    • Tree Shape with Radius End (SF)
      • Double Cut
      • Single Cut
  • Abrasives
    • Bench Grinding Wheels
    • Flap Wheels
    • Silver Line Grinding Wheels
    • Flap Discs
    • Flap Wheels-Aluminum Oxide
    • Grinding wheels - Depressed Center
    • Shop Rolls for Metal
  • Metric Combined Tap and Drill High Speed
  • Woodruff Key Seat Cutters H.S.
    • Woodruff Key Seat Cutters Straight Teeth
    • Woodruff Key Seat Cutters Staggered Teeth
    • Woodruff Key Seat Cutters Straight Teeth
  • Counterbores
    • Metric Counterbores
    • Numerical-Fractional Counterbore
  • Corner Rounding End Mills HS
  • Carbide Drills
    • Jobbers Length Metric
    • Jobbers Length Fractional
    • Jobbers Length Letter Size
    • Jobbers Length Wire Gauge Size
    • Screw Machine Length Fractional
    • Screw Machine Length Letter Size
    • Screw Machine Length Straight Flute Fractional
    • Screw Machine Length Straight Flute Letter Size
    • Screw Machine Length Straight Flute Wire Gauge
    • Screw Machine Length Straight Flute Metric Sizes
    • Screw Machine Length Wire Gauge Size
    • Spade Drills Screw Machine Length
    • Carbide Tipped Drill Bits
      • Carbide Tipped Jobber Length Fractional
      • Carbide Tipped Jobber Length Letter
      • Carbide Tipped Jobber Length Wire Gauge
      • Carbide Tipped Taper Length Drill Bits
      • Carbide Tipped Taper Length Drill Metric
  • Reamers
    • Adjustable Hand Reamers, High Speed
    • Chucking Reamer Cobalt Spiral Flute Fractional
    • Chucking Reamer Cobalt Spiral Flute Fractional USA
    • Chucking Reamer Cobalt Straight Flute Fractional
    • Chucking Reamer Cobalt Straight Flute Letter
    • Hand Expansion Reamers High Speed
    • Hand Expansion Straight Flute Reamer
    • Left Hand Expansion Reamers High Speed
    • Left Hand Expansion Spiral Flute Reamer
    • Metric Hand Expansion Reamer High Speed
    • Metric Hand Expansion Straight Flute Reamer
    • Taper Shank Chucking Reamer HS Spiral
    • Taper Shank Chucking Reamer HS Straight
    • Taper Shank Metric Chucking Reamer HS Straight
    • TaperShank Chucking Reamer Carbide Tipped Straight
    • Chucking Left Hand Straight Flute HS USA
    • Chucking Reamer Straight Shank Straight Flute HS
    • Chucking Right Hand Spiral Shank Straight Flute HS
    • Chucking Reamer Strt. Shank Strt. Flute Cobalt
    • Chucking Reamer Spiral Flute Wire Gauge
    • Chucking Reamer Straight Wire Gauge
    • Chucking Reamers Fractional Spiral
    • Chucking Reamers Fractional Straight
    • Chucking Reamers Letter Size Spiral
    • Chucking Reamers Letter Size Straight
    • Chucking Reamers Special Decimal HS
    • Chucking Reamers Spiral Flute Made in USA
    • Chucking Reamers Straight Flute Made in USA
    • Chucking Left Reamers Hand Straight Flute HS USA
    • Chucking Right Hand Spiral Flute Cobalt USA
    • Hand Reamers Fractional Spiral HS
    • Hand Reamers, Fractional, High Speed Steel,
      • Fractional, Spiral Flute
      • Fractional, Straight Flute
    • High Speed Aligning Reamers Hex Shank
    • High Speed Aligning Reamers Straight Shank
  • High Speed Drill Bits
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Aircraft Extension, High Speed, Fractional
    • Letter Size Left-Hand Jobbers Length Drill H.S.
    • Split Sleeve Morse Taper
    • Taper Drill Small Shank
    • Taper Length Wire Gauge High Speed
    • Taper Length Drills High Speed
    • Taper Length Drills Metric HS
    • Taper Length Drills Tanged H
      • D HS
    • Taper Length Drills Tanged H/D HS
    • Taper Length Drills Tanged HS
    • Taper Shank Drill Fractional
    • Taper Shank Drill Oversize Shank
    • Taper Shank Letter Size
    • Taper Shank Metric
    • Taper Shank Stub Length Metric
    • Taper Shank Wire Gauge Size
    • Fractional Left Hand Jobber Length Drill H.S.
    • Metric Left Hand Jobber Length Drill H.S.
    • Wire Size Left-Hand Jobbers Length Drill H.S.
    • Screw Machine Length Drills
      • Fractional High Speed
      • Letter High Speed
      • Wire Gauge High Speed
    • High Speed Fractional
      • High Speed Taper Length
      • High Speed Taper Length
    • High Speed Taper Length, Fractional
    • Extra Length Drill Bits
      • Extra Length High Speed - Best Value
      • Extra length High Speed 48 inch
      • Extra length High Speed 8 inch
      • Extra Long Fractional - Best Value
      • Extra length High Speed 12 inch
      • Extra length High Speed 18 inch
      • High Speed Extra Length 24 inch
    • High Speed Silver and Deming
    • High Speed Silver and Deming Metric

    • Shop by Brand

  • Suncutting
  • Lavallee & IDE
  • Pearl Abrasives
  • Perma-coil
  • Time-Sert
  • Cushman
  • Big-Sert
  • Euroboor
  • View all Brands

    • Featured Products

    SALE
    Special Thread 1-1/8-16-3 Round Adjustable Die H.S. Special Thread 1-1/8-16-3 Round Adjustable Die H.S.
    Quick view

    Special Thread 1-1/8-16-3 Round Adjustable Die H.S.

    MSRP:
    Was: $185.34
    Now: $176.07
    Add to Cart
    SALE
    Special Thread 1-1/2-14-2-1/2 Round Adjustable Die H.S. Special Thread 1-1/2-14-2-1/2 Round Adjustable Die H.S.
    Quick view

    Special Thread 1-1/2-14-2-1/2 Round Adjustable Die H.S.

    MSRP:
    Was: $109.26
    Now: $103.80
    Add to Cart
    SALE
    Special Thread 15/16-20-2 Round Adjustable Die H.S. Special Thread 15/16-20-2 Round Adjustable Die H.S.
    Quick view

    Special Thread 15/16-20-2 Round Adjustable Die H.S.

    MSRP:
    Was: $71.35
    Now: $67.79
    Add to Cart
    SALE
    Special Thread 15/16-28-2 Round Adjustable Die H.S. Special Thread 15/16-28-2 Round Adjustable Die H.S.
    Quick view

    Special Thread 15/16-28-2 Round Adjustable Die H.S.

    MSRP:
    Was: $71.35
    Now: $67.79
    Add to Cart
    SALE
    Special Thread 1-1/4-24-2-1/2 Round Adjustable Die H.S. Special Thread 1-1/4-24-2-1/2 Round Adjustable Die H.S.
    Quick view

    Special Thread 1-1/4-24-2-1/2 Round Adjustable Die H.S.

    MSRP:
    Was: $109.26
    Now: $103.80
    Add to Cart
    SALE
    Special Thread 1-1/8-24-3 Round Adjustable Die H.S. Special Thread 1-1/8-24-3 Round Adjustable Die H.S.
    Quick view

    Special Thread 1-1/8-24-3 Round Adjustable Die H.S.

    MSRP:
    Was: $185.34
    Now: $176.07
    Add to Cart
    SALE
    Special Thread 3-3/4-8-6 Round Adjustable Die H.S. Special Thread 3-3/4-8-6 Round Adjustable Die H.S.
    Quick view

    Special Thread 3-3/4-8-6 Round Adjustable Die H.S.

    MSRP:
    Was: $488.91
    Now: $464.46
    Add to Cart
    SALE
    Special Thread 13/16-32-2 Round Adjustable Die H.S. Special Thread 13/16-32-2 Round Adjustable Die H.S.
    Quick view

    Special Thread 13/16-32-2 Round Adjustable Die H.S.

    MSRP:
    Was: $71.35
    Now: $67.79
    Add to Cart

    Current Top Sellers

    SALE
    Special Thread Hand Tap 1/4-22, High Speed Taper
    Quick view

    Special Thread Hand Tap 1/4-22, High Speed Taper

    MSRP:
    Was: $13.03
    Now: $12.38
    SALE
    High Speed 3/4 x 8 Square Tool Bit
    Quick view

    High Speed 3/4 x 8 Square Tool Bit

    MSRP:
    Was: $28.35
    Now: $26.93
    Add to Cart
    SALE
    Special Thread Hand Tap 7/8-12, High Speed Bottom
    Quick view

    Special Thread Hand Tap 7/8-12, High Speed Bottom

    MSRP:
    Was: $34.99
    Now: $33.24
    Add to Cart
    SALE
    Ball Nose High Speed End Mill 11/16 Dia., 1-5/16" Cut Length, 3-5/16" O.A.L.,1/2" Shank Dia.
    Quick view

    Ball Nose High Speed End Mill 11/16 Dia., 1-5/16" Cut Length, 3-5/16" O.A.L.,1/2" Shank Dia.

    MSRP:
    Was: $32.93
    Now: $31.28
    Add to Cart
    SALE
    Quick view

    Carbide Tipped Jobber Length 1/2, High Speed Steel Body

    MSRP:
    Was: $39.65
    Now: $37.67
    Add to Cart
    SALE
    Spiral Point Special Thread Hand Tap 3/8-27, High Speed
    Quick view

    Spiral Point Special Thread Hand Tap 3/8-27, High Speed

    MSRP:
    Was: $15.91
    Now: $15.12
    Add to Cart
    SALE
    Hex Die, Type: Metric Special Threads Right Hand, Size: 15mm x 1.5mm Metric Carbon Steel Hex Die, Type: Metric Special Threads Right Hand, Size: 15mm x 1.5mm Metric Carbon Steel
    Quick view

    Hex Die Special Thread 15mm x 1.5mm Metric Carbon Steel

    MSRP:
    Was: $21.79
    Now: $20.70
    Add to Cart
    SALE
    Carbon Steel 0-80, 13/16" O.D., Round Adjustable H.S. Split Die Right Hand Carbon Steel 0-80, 13/16" O.D., Round Adjustable H.S. Split Die Right Hand
    Quick view

    Carbon Steel 0-80, 13/16" O.D., Round Adjustable Split Die Right Hand

    MSRP:
    Was: $10.85
    Now: $10.31
    Add to Cart

    New Products

    SALE
    Special Thread Hand Tap 1-3/8-6, High Speed Bottom
    Quick view

    Special Thread Hand Tap 1-3/8-6, High Speed Bottom

    MSRP:
    Was: $109.80
    Now: $104.31
    Add to Cart
    SALE
    Special Thread Hand Tap 1-1/2-6, High Speed Bottom
    Quick view

    Special Thread Hand Tap 1-1/2-6, High Speed Bottom

    MSRP:
    Was: $145.07
    Now: $137.82
    Add to Cart
    CUSTOM ORDER: Contact us for pricing
    Quick view

    CUSTOM ORDER: Contact us for pricing

    MSRP:
    Was:
    Now: $0.00
    Add to Cart
    Quick view

    16ER External Right Hand 10 USA Buttress Laydown Threading Insert

    MSRP:
    Was:
    Now: $23.00
    Add to Cart
    Quick view

    16ER-10-UN External Unified Threading Insert - P25C

    MSRP:
    Was:
    Now: $24.00
    Add to Cart
    Quick view

    16ER-10-UN External Unified Threading Insert - MXC

    MSRP:
    Was:
    Now: $24.00
    Add to Cart
    SALE
    Cobalt 1/8- 11/16- 5 inch P3 Cut-Off Blade
    Quick view

    Cobalt 1/8- 11/16- 5 inch P3 Cut-Off Blade

    MSRP:
    Was: $25.00
    Now: $24.00
    Add to Cart
    SALE
    Cobalt 3/32- 11/16- 5 inch P2 Cut-Off Blade
    Quick view

    Cobalt 3/32- 11/16- 5 inch P2 Cut-Off Blade

    MSRP:
    Was: $24.00
    Now: $23.00
    Add to Cart
    ×
    Join Our Mailing List for special offers!
    Contact Us
    Mailing Address:

    Suncutting Tools
    7832 Collins Ave #203
    Miami Beach, FL 33141

    For any inquiries please reach out to:
    sales@suncutting.com
    Accounts & Orders
    • Wishlist
    • Login or Sign Up
    • Shipping & Returns
    • Sitemap
    Quick Links
    • Contact Us
    • Blog
    • Shipping & Returns
    • Privacy Policy
    Recent Blog Posts
    • Understanding Lathe Cutting Tools
    • A close look at carbide cutting tools
    • Quality vs Quantity in Machining
    • High Speed Steel vs. Carbide Cutting Tools
    Connect with Us:
    • © Suncutting Tools
    • | Sitemap
    • | Premium BigCommerce Theme by Lone Star Templates